RopeLab Quiz 5: Energy absorbing lanyards
A quick quiz to test your understanding of various configurations of energy absorbers and lanyards.
There are 5 multiple choice questions. Once you have finished, click on the “View questions” link at the end to see the correct answers to each question.
All five questions refer to the following image.
DISCLAIMER: Always refer to, and ensure that your use is consistent with manufacturer documentation. Most of the configurations shown below are inappropriate for worker protection and are certainly outside the use specified by manufacturers.
Quiz-summary
0 of 5 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
Information
Energy absorbing lanyards and energy absorbing shock-packs behave differently in systems depending on where and how they are used.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 5 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Average score |
|
Your score |
|
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- Answered
- Review
-
Question 1 of 5
1. Question
1 points1. Single unit at load.
What should be the theoretical peak force experienced by the load with this configuration?
Correct
Incorrect
-
Question 2 of 5
2. Question
1 points2. Two single units connected in series.
What should be the theoretical peak force experienced by the load with this configuration?
Correct
Incorrect
-
Question 3 of 5
3. Question
1 points3. Two units connected in parallel at the load.
What should be the theoretical peak force experienced by the load with this configuration?
Correct
Incorrect
-
Question 4 of 5
4. Question
1 points4. Two parallel units at the load connected to a single unit at the anchor.
What should be the theoretical peak force experienced by the load with this configuration?
Correct
Incorrect
-
Question 5 of 5
5. Question
1 points5. Single units at the load and anchor connected with a lanyard.
What should be the theoretical peak force experienced by the load with this configuration?
Correct
Incorrect
Related Posts
About The Author
Richard Delaney
Richard Delaney has worked professionally with ropes since 1992 as a multi-pitch rock-climbing instructor, technical rescue instructor and rope access technician. Understanding and teaching the Physics of Rigging is a core passion of Richard’s, one based on his experience, and his prior professional life as a qualified engineer.